By Resin – G-FAM Co., Ltd

Products

Producing high value-added products through global technological excellence and continuous innovation

By Resin / By Type

GFALOY mPPE(Polyphenylenether)

Characteristics

Maintaining mechanical strength in wide temperature range
High heat resistance
Low water absorption with good dimensional stability in aquas environment
Excellent compatibility with styrenic resins
1. Broad design space for polymer alloy
Non-halogenated flame retardant system
Alloy with PA to expand applications

Applications

Water managements
1. Water Pump (Impeller/Housing/Joint) Water Softener/Purifier (Tank, Fauset, Valves etc.)
Document handlings
1. Printer/Copier/ATM (Frame, Guide, Chaises etc.)
Semiconductors : IC Chip Tray
Automotives : Ignition coil bobbin, Fender, Fuse Box
Consumers : Shavers

GFAREX PC(Polycarbonate)

Characteristics

Amorphous with high Tg (125°C)
Maintaining high modulus and ductility over the wide temperature range (-40°C~125°C)
Clarity and transparency in general
Freedom of color-ability even for high chromatic colors
Limited chemical resistance
Notch sensitivity
Flame resistance (UL HB~V0/5VA)

Applications

Glazing : Sheet (Glass replacement)
Home Appliances : Mobile phons, TV, Blenders
Safety : Face shield, Helmet, Riot shield, Toe cap
Automotives : Lamp covers, Instrument panel, Bumper facia
Semiconductors : Wafer shipping box (FOSB), Storage boxes (Pellicle, Reticle etc.)

GFAIMID PEI (Polyetherimide)

Characteristics

Amorphous polymer with 215ºC of glass transition temperature
High stiffness and mechanical strength
Good chemical resistance
Low outgassing and migration
Dimensional stability at elevated temperature
Inherently flame resistance
Low smoke emission

Applications

Mass transportation : Passenger seat, Connector
Safety : Fire fighter helmet
Consumers : Utensil, MWO boul
Electrical/Electronics : RF filter, Optical fiber connector
Automotives : Light reflector
Semiconductors : LCD cassette. FOUP, Test sockets

GFAEL TPE(Thermo Plastic Elastomer)

Characteristics

Excellent elasticity similar to rubbers
Hard and soft segment structure
Good oxidation resistance
Thermo-plastic process-ability

Applications

Consumers : Shoe soles, Cap inner liners(Seal), Foam
Adhesives : Hot melt
Industrials : Soft grips, Bicycle tire

GFAPEEK PEEK (Polyetheretherketone)

Characteristics

Semi crystalline polymer which has 334ºC of meting point and 143ºC of glass transition temperature
Excellent heat resistance especially with 220ºC of continuous use temperature.
Very good tribological properties(wear resistance)
High fatigue resistance
Excellent chemical resistance
Inherent flame resistance
Low outgas and migrations
Low toxic gas emission during conversion

Applications

Mass transportation : Connectors, Interiors/exteriors
Automotives : Piston ring
Semiconductors : Wafer carrier, FOUP, Shapes (Thick sheet/Bar)
Additive manufacturing : Filament

GFAMID PA(Polyamide)

Characteristics

Semi-crystalline polymers with good chemical resistance.
Excellent process-ability
Good price/performance (PA6, PA66)
Outstanding mechanical properties
High melting temperature (PPA)
Moisture absorption 2.5% at 23ºC 50RH (PA66)
Must do pre-drying before conversion

Applications

Fiber/Fabric : Filament (Nylon)
Consumers/Furniture : Chairs, Buckles, Joint
Electrical/Electronics : Relay, Circuit Breaker, Gear
Automotives : Fuel system, Wheel cap, Radiator, Connectors,
LED Reflector (Epi chip)
Industrial : Conveyors, Pully, Latches

GFAREN ABS (Acrylonitrile-Butadiene-Styrene)

Characteristics

Copolymers composed of 3 monomers
1. Acrylonitrile/Butadiene/Styrene
Balanced properties (mechanical/thermal/flow)
Good authentic and surface gloss
High impact resistance
Practical heat resistance (~100°C)
Limited use in outdoor (UV resistance concern)

Applications

Consumer electronics : TV, Washing Machines, Refrigerators, Irons etc.
Consumers: Toy(Lego), Bottles
Electrical/Electronics : Plugs, Consents, Switch
Automotives : Instrument panel, Center facia/consol
Semiconductors : Lids of storage box (Antistatic)

OTHERS

Product Group	Key Resin	Fillers/Additives	Characteristics	Applications
GFAEST	Polyesters (PET/PBT)	GF/Mineral/Impact Modifier/ UV Stabilizer	Easy flow Impact Resistance Weatherability	Toe caps Mobile phone housings Connectors/Switches
GFATON	PPS	GF/Mineral	High stiffness Flame retardance Heat resistance	Automotives(Fuel systems) Processing carriers (Display) Processing Cassets(PCB)
GFAPOM	Polyacetal	GF/Mineral	Lubricity Good flow Stiffness	Bearings Gears
GFALIN	Polyolefins (PE/PP)	GF/Mineral	Cost Good processing Chemical Resistance	Wire cable coating Pipes
GFAFON	Polysulfons (PES/PSU/PPSU)	GF/Mineral	Heat resistance Dimensional stability Low outgas FDA/Medial complaint	Milk bottles Medical/surgical devices

Company: G-FAM Co., Ltd

Address: (27639) 1124-41, Daegeum-ro, Geumwang-eup, Eumseong-gun, Chungcheongbuk-do

CEO: Kim Cheon-gyu
Tel: +82-43-881-5605
Fax: +82-43-881-5607
E-mail: admin@g-fam.kr

©Copyright 2025 G-FAM. All Rights Reserved.